With lots of time on my hands I am working my way through the sub frames on my bikes.
I have found the spacer sleeves have been corroded to a greater or lesser degree, to rectify this I turn it down to 16mm diameter and press on a stainless sleeve. A good clean and repaint finishes it off!
By supporting the frame and engine and removing the sill panels the frame can be replaces in about 30 minutes! (Providing all the fasteners come undone!)
Just finished fitting the subframe, all went well, beware the vertical swing arm has a subtle offset, so has to fitted correctly!
Powered by mwForum 2.29.3 © 1999-2013 Markus Wichitill