The UK C1 Forum - Not logged in
Is there any way to bypass the stand mechanism switch so the bike can move even with the stand in vertical position?
You need to connect micro switch wires. As simple as that.
if you remove the front wheel splash guard, you will see a small two pin flying plug and socket. put a shorting bridge wire on the ecu side plug/socket
thanks a lot for all replies.
I will not touch it yet because it is indeed dangerous.
a quick safety measure is to rope stand foot to wheel. this will prevent stand foot from rotating backwards.
I eventually shorted the switch.
I feel like Copperfield, now I can free the bike from any anomalous road surface and especially uphill ones.
Powered by mwForum 2.16.1 © 1999-2008 Markus Wichitill